Silicone Rubber Cold Shrink Termination And Joints 15KV Gray
Cold Shrink Terminations are widely applicable for use on polymeric cables medium voltage up to 42 kV. It can terminating indoor and outdoor medium voltage cables. Made of high quality, UV resistant, Silicone Rubber (SIR), the termination offers easy installation and reliable performance insite. No tools, orheat sources are required.
The core is stepped to allow a greater application range for armoured cables. Both indoor and outdoor terminations are available for single core and three core cables.
Cable section: 25 to 630 mm'
Voltage Rating: 6/10 (12) kV, 6.35/11 (12) kV, 8.7/15 (17.5) kV,
12/20 (24) kV, 12.7/22 (24) kV, 18/20 (24) kV, 18/30 (36) kV,
20.8/36 (42) kV, 21/35 (40.5) kV, 26/35 (40.5) kV
Chuangyin Cold Shrink Termination are in accordance with
IEC60502-4, IEEE standard 48, ANSI C119.4, VDE 0278 and
other industry standards.
Features
Made of high quality, UV resistant, Silicone Rubber (SIR)
Hydrophobic recovery, non-flammable, erosion resistance and fungus resistant
Stress relief by Geometric Method technology
Lightweight, compact design permits installs in restricted spaces
Cable section: 25 to 400 mm2
In compliance with IEC60502-4, IEEE standard 48, ANSI C119.4, VDE
kit contents
| Cold Shrink Terminations | Self Fusing Tape |
| Breakout | Mastic |
| SealingTube | Silicone Tube |
| Installation Tube | Silicone Grease |
| Constant Force Spring | Wipers |
| GroundingBraid | Tap |
| Sealant Tape | Installation Instruction
|
Technical Datal
| Item | Parameters |
| Voltage Class | 15 kV |
| Voltage Rating | 6/10 (12) kV, 6.35/11 (12) kV, 8.7/15 (17.5) kV |
| Installation Site | Indoor |
| AC Withstand Voltage 5min | 39 kV |
| DC Withstand Voltage 15min | 35 kV |
| Moisture Test | 11 kV for 300h |
| Wet AC Withstand Voltage 1min | - |
| Salt Fog Test | - |
| Partial Discharge | 15 kV, ≤10 pC |
| BIL | 95 kV |
| Cable Section | 25 to 400 mm2 |
