Separable Connector 200 A 15 kV Class Loadbreak Separable Elbow Connector F Type
Application
Chuangyin® Loadbreak Elbow Connector is widely applicable for connecting underground XPLE cable to packaged substation, RMU, cable branch box, buried transformer and leads of other HV equipments equipped with loadbreak bushings, junctions, or connectors in 200 A power network.
Cable section: 25 to 120mm2
The interface complys with IEEE standard 386, 8.3/14.4 kV, 200 A loadbreak design.
Features
Made of high quality EPDM rubber
Fully shielded and submersible
With/Without test point
100% factory tested
In compliance with IEEE standard 386
Construction
1. Insulating Layer
2. Operating Eye
3. Test Point
4. Semi-conducting Insert
5. Semi-conducting Shield
6. Probe
7. Lug
Technical Data
| Item | Parameters |
| Voltage Class | 15 kV |
| Voltage Rating | 8.3/14.4 kV |
| Rated Current | 200 A |
| AC Withstand Voltage 5min | 39 kV |
| DC Withstand Voltage 15min | 35 kV |
| Partial Discharge | 15 kV, ≤10 pC |
| BIL | 95 kV |
| Thermal Current | 10 kA, 0.6 s |
| Dynamic Current | 20 kA, 10 ms |
| Cable Section | 25 to 120mm2 |
Kit Contents
Elbow Connector Wipers
Lug Silicone Grease
Special Wrench Installation Instruction
Probe Certificate
Ordering Instructions
| Part Number | Cable Section (mm²) | Diameter over Insulation (mm) | Code |
| CYS-A(S)ZT(01)-15/200-25 | 25 | 16 to 17.8 | A |
| CYS-A(S)ZT(01)-15/200-35 | 35 | 17 to 19 | B |
| CYS-A(S)ZT(01)-15/200-50 | 50 | 18 to 20 | B |
| CYS-A(S)ZT(01)-15/200-70 | 70 | 20 to 21.4 | C |
| CYS-A(S)ZT(01)-15/200-95 | 95 | 21.6 to 23.1 | C |
| CYS-A(S)ZT(01)-15/200-120 | 120 | 23 to 24.6 | D |
