Chuangyin® Insulated Cap is widely applicable for terminating and insulating energized bushings, including bushing inserts, loadbreak junctions, feed-thru inserts, etc. in 200 A power network.

The interface complys with IEEE standard 386, 8.3/14.4 kV, 200 A loadbreak design.

Features

Made of high quality EPDM rubber

Fully shielded, insulated and submersible

Terminating and insulating cap 15 kV, 200 A energized interfaces

100% factory tested

In compliance with IEC standard 386

Construction

1. Insulating Layer

2. Semi-conducting Shield

3. Semi-conducting Insert

4. Probe

5. Grounding Tab

Technical Data

Item	Parameters
Voltage Class	15 kV
Voltage Rating	8.3/14.4 kV
Rated Current	200 A
AC Withstand Voltage 5min	39 kV
DC Withstand Voltage 15min	35 kV
Partial Discharge	15kV, ≤10 pC
BIL	95 kV
Thermal Current	10 kA, 0.6 s
Dynamic Current	20 kA, 10 ms

Kit Contents

Insulated Cap

Wipers

Silicone Grease

Installation Instruction

Certificate

Ordering Instructions

Product	Part Number
IEEE 15 kV, 200 A Insulated Cap	CYS-ASJM-15/200

Class Insulated Cap Cable Separable Connectors Rubber 200 A 15 Kv

Instrument Current Transformer

LV Current Transformer

MV Current Transformer

MV Voltage Transformer

Split Core Current Transformer

Rogowski Coil Current Transformer

Cold Shrink Termination

Cold Shrink Cable Joints

Separable Connectors

Plug In Bushing

Busbar Connection System

Epoxy Resin Cast Bushing

Current Transformer For Energy Meter

Magnetic Latching Relay

Metering Unit

Class Insulated Cap Cable Separable Connectors Rubber 200 A 15 Kv

12v insulation connectors

insulated cable connector

insulation connector