Separable Connector 200A, 15 kV Class Loadbreak Bushing Insert Straight Connector
Application
Chuangyin® Loadbreak Bushing Insert is widely applicable for connecting standard 200A bushing well, as a one piece integral loadbreak bushing. Bushing insert is a primary component in 200 A power network.
The interface complys with IEEE standard 386, 8.3/14.4 kV, 200 A loadbreak design.
Features
Made of high quality EPDM rubber
Fully shielded, insulated and submersible connection for loadbreak system
Compact design, no tools required for installation, can be installed by hand
100% factory tested
In compliance with IEC standard 386
Construction
1. Insulating Layer
2. Yellow Positioning Ring
3. Semi-conducting Shield
4. Contact
5. Threaded Connection
6. Hex Broach
7. Probe
8. Arc Quenching Rod
9. Semi-conducting Insert
Technical Data
| Item | Parameters |
| Voltage Class | 15 kV |
| Voltage Rating | 8.3/14.4 kV |
| Rated Current | 200A |
| AC Withstand Voltage 5min | 39 kV |
| DC Withstand Voltage 15min | 35 kV |
| Partial Discharge | 15 kV, ≤10 pC |
| BIL | 95 kV |
| Thermal Current | 10 kA, 0.6 s |
| Dynamic Current | 20 kA, 10 ms |
Kit Contents
Bushing Insert
Dustproof Cap
Wipers
Silicone Grease
Installation Instruction
Certificate
Elbow connector/Elbow arrester /Insulated cap/ Bushing well
Ordering Instructions
| Product | Part Number |
| 15 kV, 200A Loadbreak Bushing Insert | CYS-ADT-15/200 |
