Separable Connector 200A, 15kV Class Loadbreak Junction for Connection System
Application
Chuangyin® Loadbreak Junction is widely applicable for connecting in pad-mounted apparatus, under-ground vaults, and other apparatus to sectionalize, establish loops, taps, or splices, and to facilitate apparatus changeouts. It has two or more interconnected bushing and/or bushing well interfaces.
The interface complys with IEEE standard 386, 8.3/14.4 kV, 200 A loadbreak design.
Features
Made of high quality EPDM rubber
With two or more interconnected bushing and/or bushing well interfaces
Fully shielded connection for loadbreak system
100% factory tested
In compliance with IEC standard 386
Construction
1. Arc Quenching Rod
2. Probe
3. Insulating Layer
4. Semi-conducting Shield
5. Bus-bar
Technical Data
| Item | Parameters |
| Voltage Class | 15 kV |
| Voltage Rating | 8.3/14.4 kV |
| Rated Current | 200A |
| AC Withstand Voltage 5min | 39 kV |
| DC Withstand Voltage 15min | 35 kV |
| Partial Discharge | 15 kV, ≤10 pC |
| BIL | 95 kV |
| Thermal Current | 10 kA, 0.6 s |
| Dynamic Current | 20 kA, 10 ms |
Kit Contents
Loadbreak Junction
Dustproof Cap
Wipers
Silicone Grease
Installation Instruction
Certificate
Elbow connector/Elbow arrester /Insulated cap/ Bushing well
Ordering Instructions
| Product | Part Number |
| 15 kV, 200A 2-way Junction | CYS-AMP2-15/200 |
| 15 kV, 200A 3-way Junction | CYS-AMP3-15/200 |
| 15 kV, 200A 4-way Junction | CYS-AMP4-15/200 |
